Many of us mistake the Home Automation System In India for intrusion detection only. But the truth is that they also add an additional layer of protection, in the form of fire detection.
Unlike intrusion direction, the fire detection devices don’t need to be turned on and off: they’re on the job 24/7. The Security Surveillance System In India companies will recommend at least one monitored smoke and heat sensor for every system they sell, even though building codes don’t require that the sensors be monitored.
In fact, fire monitoring is as much important as it is to have the house secured against burglary.
What if you are away and a fire breaks out? It is the fire alarm that goes off giving at least a warning signal to the neighbors to act then and there to avoid further trauma.
The very mechanism of home fire monitoring vests on the wireless smoke and heat sensor, and it is certainly going to be the most sought after fire detection technologies.
- Smoke Detection: It uses photoelectric technology to detect the airborne particulate; the sensor literally has the power to sample the air. They are best used for detecting smoldering fires and is the most widely used today.
- Fixed Temperature Sensor: This has a very specific system for smoke detection once you put it in the standard trigger point i.e. 135 degrees F. Soon as the detector senses this temperature hitting this pre-set mark, the alarm is activated.
- “Rate of Rising” Temperature Sensor: The sensor is capable of determining if the room temperature exceeds 15 degrees F within a 60-second period. A dangerous rate of rising as it is, it’d trigger the alarm instantly.
Rest assured, the best Home Automation System In India cover all the three important aspects for fire smoke alarm.
Placement
Smoke and heat sensors are ideally placed in the high end of the wall or even on the ceiling. The thumb rule is that of not placing the alarm in the “corner” where the wall and ceiling meet. Generally, one sensor on each floor is recommended, starting with the upper floors, and working down (since heat rises, and upstairs is usually where the bedrooms are).
A kitchen is a big no for placing the smoke & heat sensor. As you might have figured it already, there is too much possibility of a false alarm. Likewise, a bathroom too cannot be a fit as the location to install a fire smoke alarm since the steam may be interpreted by a sensor as smoke.
Monitored Fire Detection is Best
It’s very much likely that you won’t be at home around the year; everyone is bound to go out on a long tour once in a while. Therefore, a monitored smoke & heat sensor is the wise choice for homeowners looking for a hassle-free time. Instead of relying entirely on the marketing gimmicks that make tall claims about fire safety, you are better off getting a fire smoke alarm which is versatile enough to cater to your needs.